GB 10401-1989 永磁式直流力矩电动机通用技术条件

作者:标准资料网 时间:2024-05-17 19:23:58   浏览:9835   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:永磁式直流力矩电动机通用技术条件
英文名称:Permanent magnet direct current torque motors--General specification for
中标分类:
ICS分类: 电气工程 >> 旋转电机 >> 电动机
替代情况:替代GBn 114-1981;被GB/T 10401-2008代替
发布部门:中华人民共和国机械电子工业部
发布日期:1989-01-04
实施日期:1989-09-01
首发日期:1989-02-22
作废日期:2009-03-01
主管部门:中国电器工业协会
提出单位:全国徽电机标准化技术委员会
归口单位:全国微电机标准化技术委员会
起草单位:机械电子工业部第二十一研究所
起草人:王双寿、杜洪富、胡如舟、陈健初
出版社:中国标准出版社
出版日期:1989-09-01
页数:27页
适用范围

本标准规定了永磁式直流力矩电动机的通用技术要求、试验方法、检验规则及标志、包装、运输和贮存。本标准适用于永磁式直流力矩电动机。本标准应与永磁式直流力矩电动机专用技术条件一起使用。各类永磁式直流力矩电动机(以下简称电机)的具体技术指标及附加或特殊要求,在专用技术条件中规定。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 电气工程 旋转电机 电动机
下载地址: 点击此处下载
Product Code:SAE AMS3328
Title:Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 35 - 45
Issuing Committee:Ams Ce Elastomers Committee
Scope:This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.【英文标准名称】:Footwearmanufacturingmachines-Lastingmachines-Safetyrequirements
【原文标准名称】:靴袜制造机械.拉伸耐久试验机.安全性要求
【标准号】:BSEN931-1997+A2-2009
【标准状态】:现行
【国别】:英国
【发布日期】:1998-01-15
【实施或试行日期】:1998-01-15
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:解剖学;配料;燃烧;检查表;通信;控制;定义;设计;电击;电气设备;排放;供能系统(建筑物);人类工效学;鞋靴;危害;拉伸耐久试验机;皮革;皮革加工设备;液体;机械;故障;作标记;机械卷边连接;噪声(环境的);职业病;职业安全;操作说明书;压力;生产;人体保护;重新安排;安全;安全工程;安全措施;安全要求;剪切;制鞋机械;制鞋机;制鞋;鞋;规范(验收);拼接机;应力;表面;术语;用户信息;蒸气;验证;加工状态;工作场所安全
【英文主题词】:Anatomy;Batching;Burning;Checklists;Communication;Control;Definitions;Design;Electricshock;Electricalequipment;Emission;Energysupplysystems(buildings);Ergonomics;Footwear;Hazards;Lastingmachines;Leather;Leather-workingequipment;Liquids;Machines;Malfunction;Marking;Mechanicalcrimping;Noise(environmental);Occupationaldiseases;Occupationalsafety;Operatinginstructions;Pressure;Production;Protectionofpersons;Reset;Safety;Safetyengineering;Safetymeasures;Safetyrequirements;Shearing;Shoemachinery;Shoemachines;Shoemanufacture;Shoes;Specification(approval);Splicingmachines;Stress;Surfaces;Terminology;Userinformation;Vapours;Verification;Workingposture;Workplacesafety
【摘要】:1.1Thisstandardisapplicabletolastingmachinesusedinthefootwearmanufacturingindustry,namely:-Adhesiveforepartlastingmachines(seefigure1),-Handoperatedadhesivesidelastingmachines(seefigure3A),-Adhesiveseatlastingmachines(seefigure2),-Adhesiveseatandsidelastingmachines(seefigure2),-Handoperatedtack/staplesidelastingmachines(seefigure3B),-Tackseatlastingmachines(seefigure2),-Tackseatandsidethermocementlastingmachines(seefigure2),-Tackheelseatandthermocentsidelastingmachines(seefigure2),-Tackheelseatandthermocent+tacksidelastingmachines(seefigure2).1.2Thisstandarddoesnotapplytolastingmachineswhichprocessgranularthermocement.1.3Thisstandardspecifiesrequirementsforsafedesign,constructionanduseofthemachines.Nospecificrequirementsareincludedfortransport,commissioninganddecommissioning.Ittakesaccountofintendeduse,foreseeablemisuse,componentandsystemfailure.1.4Thisstandardcoversallhazardsrelevanttothefootwearmanufacturingindustry.Theuseofmachineswithinthescopeofthisstandardindifferentindustriesmaygiverisetohazardswhichwerenottakenintoaccountatthetimeofitspreparation.1.5ThisdocumentisnotapplicabletolastingmachineswhicharemanufacturedbeforethedateofitspublicationasEN.
【中国标准分类号】:Y94
【国际标准分类号】:61_060;59_140_40
【页数】:36P.;A4
【正文语种】:英语