SAE AS21919 Clamp, Loop Type, Cushioned Support

作者:标准资料网 时间:2024-05-15 01:41:17   浏览:9669   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AS21919
Title:Clamp, Loop Type, Cushioned Support
Issuing Committee:G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Scope: No scope available.
Rationale: No scope available.
下载地址: 点击此处下载
基本信息
标准名称:早餐经营规范
英文名称:Breakfast operations guiddelines
中标分类: 综合 >> 经济、文化 >> 商业、贸易、合同
ICS分类: 社会学、 服务、公司(企业)的组织和管理、行政、运输 >> 公司(企业)的组织与管理 >> 公司(企业)的组织与管理综合
发布部门:中华人民共和国商务部
发布日期:2007-12-28
实施日期:2008-05-01
首发日期:
作废日期:
提出单位:中华人民共和国商务部
归口单位:中华人民共和国商务部
起草单位:中国烹饪协会
起草人:杨柳、彭克泉、冯恩援、梁兆山、邓庭富、张惠欣、许云飞、赵涛、马彦华、田烨
出版社:中国标准出版社
出版日期:2008-05-01
页数:平装16开/页数:8/字数:9千字
批文号:23380-2008
适用范围

本标准规定了开展早餐经营活动应满足的基本要求和早餐店、早餐亭、早餐车、早餐经营供应单位、食品供应商等的具体要求。

前言

没有内容

目录

前言Ⅲ 1 范围1 2 规范性引用文件1 3 术语和定义1 4 基本要求2 5 具体要求2 5.1 早餐店2 5.2 早餐亭2 5.3 早餐车3 5.4 早餐经营供应单位3 5.5 食品供应商3

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB2760 食品添加剂使用卫生标准
GB5749 生活饮用水卫生标准
GB7718 预包装食品标签通则
GB8978 污水综合排放标准
GB14881 食品企业通用卫生规范
GB14930.1 食品工具、设备用洗涤剂卫生标准
GB14930.2 食品工具、设备用洗涤消毒剂卫生标准
GB14934 食(饮)具消毒卫生标准
GB16153 饭馆(餐厅)卫生标准
GB18483 饮食业油烟排放标准
SB/T10426 餐饮企业经营规范
餐饮业和集体用餐配送单位卫生规范 中华人民共和国卫生部 2005年10月1日实施

所属分类: 综合 经济 文化 商业 贸易 合同 社会学 服务 公司(企业)的组织和管理 行政 运输 公司(企业)的组织与管理 公司(企业)的组织与管理综合
Product Code:SAE ARP1972
Title:Recommended Measurement Practices and Procedures for Emc Testing
Issuing Committee:Ae-4 Electromagnetic Environmental Effects (E3) Committee
Scope:The test methods presented in this document do not represent a modification of an existing set of test methods. Rather, they represent a series of test methods which the committee felt would provide the basic information for any type equipment. A system integrator will need to determine which tests are meaningful to his application. An effort has been made to establish shield room test methods that give results that will approximate those made in an actual installation. A major concern of those involved in preparation of this document is the need to establish meaningful limits for the tests. Measuring emissions on a signal line is only meaningful in conjunction with the susceptibility levels. And these levels are highly dependent on the equipment operating scenario. This area needs to be addressed in the future.